TECHNICAL DATA CVS-01
COVER STAIN
®
HIGH HIDE ALKYD STAIN BLOCKER
Form: CS2291
Rev.: 031813
.DESCRIPTION AND USES .
Zinsser
®
Cover Stain
®
is a high hide modified alkyd-base
stain blocker designed for application to fire, smoke and
water damaged surfaces, both interior and exterior.
Interior surfaces include ceilings, walls, doors, trim,
cabinets, furniture, and related paintable surfaces. Exterior
surfaces include exterior siding, fascia, soffits, trim, doors,
walls, foundations, railings, and related paintable surfaces
damaged by fire, smoke, and water.
.PERFORMANCE CHARACTERISTICS .
Fast drying – Recoat in less than 1 hour
Sticks to all surfaces and sands easily
Designed for interior and exterior surfaces
High hiding formula blocks stains from fire, smoke and
water damage
Excellent tannin blocker – use to seal bare cedar and
redwood
Easy soap and water clean-up
.PRODUCTS .
262764 1 Quart
262765 1 Gallon
262766 5 Gallon
.APPEARANCE .
Cover Stain is white but may be tinted toward the topcoat
color with up to 2 oz. (59 ml) universal colorant per gallon.
Tinting the primer towards the topcoat improves the hiding
power of the topcoat.
.PACKAGING .
1-quart, 1-gallon, and 5-gallon pail
PRODUCT APPLICATION .
SURFACE PREPARATION
Surfaces should be clean, dry, sound and free of dust, dirt,
excessive chalky material, grime, grease, oil, wax, mildew,
wallpaper, adhesive or any contamination that may
interfere with adhesion. If unsure of cleanliness, always
wash surface with an appropriate ammoniated cleaning
solution or solvent (do not use TSP as a cleaner). Remove
any peeling and/or unsound coatings. Sand any remaining
paint film edges smooth. Lightly sand exposed exterior
wood with 80 to 100 grit sandpaper to remove loose or
weathered wood fibers and mill glaze. When priming over
stained areas, first attempt to remove as much of the stain
as possible by washing, sanding, scraping, etc. Remove
exterior mold & mildew with Zinsser Jomax
®
Mildew Killer
and House Cleaner. Remove interior mildew with an
interior mildew cleaner. Allow surface to dry completely
before priming. Countersink exposed nail heads, spot
prime and fill all nail holes and gouges with Zinsser Ready
Patch
®
spackling compound. Wire brush rusty areas. Spot
prime knots and sap streaks with B-I-N
®
Primer-Sealer
before whole surface priming with Cover Stain
®
High Hide
Alkyd .
WARNING! If you scrape, sand or remove old paint, you
may release lead dust. LEAD IS TOXIC. EXPOSURE TO
LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS
BRAIN DAMAGE, ESPECIALLY IN CHILDREN.
PREGNANT WOMEN SHOULD ALSO AVOID
EXPOSURE. Wear a NIOSH-Approved respirator to
control lead exposure. Clean up carefully with a HEPA
vacuum and a wet mop. Before you start, find out how to
protect yourself and your family by contacting the National
Lead Information Hotline at 1-800-424-LEAD or log on to
www.epa.gov/lead.
(1 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels